View 2SD2653K_531412.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

2SD2653K
Transistors
Low frequency amplifier
2SD2653K
!Application Low frequency amplifier Driver !External dimensions (Units : mm)
(1)
0.4
(3)
!Features 1) A collector current is large. 2) VCE(sat) 180mV At IC = 1A / IB = 50mA
1.6 2.8
0.15
0.3Min.
0~0.1
Each lead has same dimensions
Abbreviated symbol : FW ROHM : SMT3 EIAJ : SC-59 JEDEC : SOT-346
0.8
1.1
0.95 0.95 1.9 2.9
(2)
(1) Emitter (2) Base (3) Collector
!Absolute maximum ratings (Ta=25C)
Parameter Collector-base voltage Symbol VCBO VCEO Collector-emitter voltage VEBO Emitter-base voltage IC Collector current ICP PC Power dissipation Junction temperature Tj Range of storage temperature Tstg
Single pulse, PW=1ms
Limits 15 12 6 2 4 200 150 -55~+150
Unit V V V A A mW C C
!Electrical characteristics (Ta=25C)
Parameter Collector-base breakdown voltage Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector cutoff current Emitter cutoff current Collector-emitter saturation voltage DC current gain Transition frequency Corrector output capacitance
Pulsed
Symbol BVCBO BVCEO BVEBO ICBO IEBO VCE(sat) hFE fT Cob
Min. 15 12 6 - - - 270 - -
Typ. - - - - - 90 - 360 20
Max. - - - 100 100 180 680 - -
Unit V V V nA nA mV - MHz pF
Conditions IC=10A IC=1mA IE=10A VCB=15V VEB=6V IC=1A, IB=50mA VCE=2V, IC=200mA VCE=2V, IE=-200mA, f=100MHz VCB=10V, IE=0A, f=1MHz
!Packaging specifications
Package Code Type 2SD2653K Basic ordering unit (pieces) Taping T146 3000
2SD2653K
Transistors
!Electrical characteristic curves
COLLECTOR TO EMITTER SATURATION VOLTAGE : VCE(sat) (V)
Ta=100C Ta=25C Ta=-40C
VCE=2V Pulsed
IC/IB=20/1 VCE=2V Pulsed 0.1
Ta=100C
COLLECTOR SATURATION VOLTAGE : VCE(sat) (V)
1000
1
1
Ta=25C
Pulsed
DC CURRENT GAIN : hFE
Ta=25C
0.1
100
Ta=-40C
IC/IB=50/1
0.01
0.01
IC/IB=20/1 IC/IB=10/1
10 0.001
0.01
0.1
1
10
0.001 0.001
0.01
0.1
1
10
0.001 0.001
0.01
0.1
1
10
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (A)
COLLECTOR CURRENT : IC (A)
Fig.1 DC current gain vs. collector current
Fig.2 Base-emitter saturation voltage vs. collector current
Fig.3 Collector-emitter saturation voltage vs. collector current
10
TRANSITION FREQUENCY : fT (MHz)
1000
VCE=2V Pulsed
1000
COLLECTOR CURRENT : IC (A)
1
SWITCHING TIME : (ns)
Ta=25C VCE=2V f=100MHz
Ta=25C
VCE=5V f=100MHz 100
tstg
Ta=100C
Ta=25C
0.1
Ta=-40C
100
10
tdon tf
0.01
0.001
0
0.5
1
1.5
10 0.001
0.01
0.1
1
10
1 0.01
tr
0.1
1
10
BASE TO EMITTER CURRENT : VBE (V)
EMITTER CURRENT : IE (A)
COLLECTOR CURRENT : IC (A)
Fig.4 Grounded emitter propagation characteristics
Fig.5 Gain bandwidth product vs. emitter current
Fig.6 Switching time
EMITTER INPUT CAPACITANCE : Cib (pF) COLLECTOR OUTPUT CAPACITANCE : Cob (pF)
1000
COLLECTOR CURRENT : IC (A)
10
Ta=25C IC=0A f=1MHz
Cib 100
Ta=25C Single Pulsed
1ms
1
10ms PW=100ms DC Operation
10
Cob
0.1
1 0.1 1 10 100 EMITTER TO BASE VOLTAGE : VEB(V) COLLECTOR TO BASE VOLTAGE : VCB(V)
0.01 0.01
0.1
1
10
100
COLLECTOR TO EMITTER VOLTAGE : VCE (V)
Fig.7 Collector output capacitance vs. collector-base voltage Emitter input capacitance vs. emitter-base voltage
Fig.8 Safe Operating Area
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any means without prior permission of ROHM CO.,LTD. The contents described herein are subject to change without notice. The specifications for the product described in this document are for reference only. Upon actual use, therefore, please request that specifications to be separately delivered. Application circuit diagrams and circuit constants contained herein are shown as examples of standard use and operation. Please pay careful attention to the peripheral conditions when designing circuits and deciding upon circuit constants in the set. Any data, including, but not limited to application circuit diagrams information, described herein are intended only as illustrations of such devices and not as the specifications for such devices. ROHM CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any third party's intellectual property rights or other proprietary rights, and further, assumes no liability of whatsoever nature in the event of any such infringement, or arising from or connected with or related to the use of such devices. Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or otherwise dispose of the same, no express or implied right or license to practice or commercially exploit any intellectual property rights or other proprietary rights owned or controlled by ROHM CO., LTD. is granted to any such buyer. Products listed in this document use silicon as a basic material. Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices (such as audio visual equipment, office-automation equipment, communications devices, electrical appliances and electronic toys). Should you intend to use these products with equipment or devices which require an extremely high level of reliability and the malfunction of with would directly endanger human life (such as medical instruments, transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other safety devices), please be sure to consult with our sales representative in advance. About Export Control Order in Japan Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control Order in Japan. In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause) on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.0

▲Up To Search▲

Price & Availability of 2SD2653K

	To Download 2SD2653K Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .